optoway trsl-7130w / TRSL-7130AW ******************************************************************************************************************************************************************************* ******************************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 v2.0 trsl-7130w / TRSL-7130AW 3.3v / 1310 nm / 1.25 gbps sff lc 2x10 single-mode transceiver ****************************************************************************************************************************************************************************** features l duplex lc single mode transceiver l compliant with ieee 802.3z 1000base-lx l compliant with fiber channel 1x sm-lc-l fc-pi l small form factor, rj-45 size, 2x10 pin package l 1310 nm ld transmitter (trsl-7130w) l 1310 nm dfb ld transmitter (TRSL-7130AW) l 19 db link power budget at least l analog monitor function -- transmitter laser bias current -- transmitter laser optical power monitor -- receiver photo detector current l ac/ac coupled signal input / output l lvttl transmitter disable input l lvttl signal detection output l single +3.3 v power supply l 0 to 70 o c operating: trsl-7130w l -20 to 85 o c operating: TRSL-7130AW l wave solderable and aqueous washable l class 1 laser international safety standard iec-60825 compliant applications l gigabit ethernet switches and routers l fiber channel switch infrastructure description the trsl-7130w series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as ieee 802.3z gigabit ethernet 1000base-lx and fiber channel 1x sm-lc-l fc-pi. this module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. the transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. a lvpecl logic interface simplifies interface to external circuitry. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) 1000 base distance (km) wavelengt h (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) signal detection trsl-7130w 1.25/1.063 30 1310 2x10 lc 0 to 70 0 to -5 -24 TRSL-7130AW 1.25/1.063 30 1310 dfb 2x10 lc -20 to 85 0 to -5 -24 lvttl absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating temperature topr 0 70 o c soldering temperature --- 260 o c 10 seconds on leads only power supply voltage vcc 0 4.5 v input voltage --- gnd vcc v output current iout 0 30 ma recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.135 3.3 3.465 v operating temperature topr 0 70 o c data rate 1000 1250 mb/s power supply current icc 200 300 ma
optoway trsl-7130w / TRSL-7130AW ******************************************************************************************************************************************************************************* ******************************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 v2.0 transmitter specifications (0 o c < topr < 70 o c, 3.135v < vcc < 3. 465v) parameter symbol min typ max units notes optical optical transmit power po -5 --- 0 dbm 1 output center wavelength l 1285 1270 1310 1310 1340 1360 nm trsl-7130w TRSL-7130AW --- --- 2 nm rms ( )/trsl-7130w output spectrum width dl 1 nm -20 db width TRSL-7130AW side mode suppression ratio smsr 30 db TRSL-7130AW extinction ratio e r 9 --- --- db output eye compliant with ieee 802.3z optical rise time t r 0.26 ns 20% to 80% values optical fall time t f 0.26 ns 20% to 80% values relative intensity noise rin -120 db/hz total jitter tj 0.227 ns 2 electrical data input current C low i il -350 m a data input current C high i ih 350 m a differential input voltage v ih - v il 300 mv data input voltage C low v il - v cc -2.0 -1.58 v 3 data input voltage -- high v ih - v cc -1.1 -0.74 v 3 disable input voltage -- low v tdis,l 0 0.5 v tx output enabled disable input voltage -- high v tdis,h vcc C 1.3 vcc v tx ouput disabled shut off time for txdis t dis 1 ms notes: 1. output power is power coupled into a 9/125 m m single mode fiber. 2. measured with a 2 7 -1 prbs. 3. these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs. receiver specifications (0 o c < topr < 70 o c, 3.135v < vcc < 3.465v) parameter symbol min typ max units notes optical sensitivity --- --- --- -24 dbm 1 maximum input power pin -3 --- dbm signal detect -- asserted pa --- --- -24 dbm transition: low to high signal detect -- deasserted pd -31 --- --- dbm transition: high to low signal detect -- hysteresis 1.0 --- db wavelength of operation 1100 --- 1600 nm electrical data output voltage C low v ol - v cc -2.0 -1.58 v 2 data output voltage C high v oh - v cc -1.1 -0.74 v 2 signal detect output voltage -- low v ol 0.8 v signal detect output voltage -- high v oh 2.0 v notes: 1. minimum sensitivity and saturation levels at ber=1e-12 for a 2 7 -1 prbs. 2. these outputs are compatible with 10k, 10kh and 100k ecl and pecl inputs.
optoway trsl-7130w / TRSL-7130AW ******************************************************************************************************************************************************************************* ******************************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 v2.0 analog diagnostics functions parameter symbol min typ max units notes transmitter laser bias current monitor bmon+, bmon- 0 vcc v 1 monitor photodiode current monitor pmon+,pmon- 0 vcc v 2 receiver received photocurrent rpd 0 1 ma 3 photodiode responsivity r 0.5 0.9 1.0 a/w applied voltage at vpdr pin vpd 2.4 vcc v 3 notes: 1. pin 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following formula: ibias = v (bmon+ - bmon-) / 10 . see below the equivalent circuit. 2. pin 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the following formula: imon = v (pmon+ - pon-) / 200 . see below the equivalent circuit. 3. pin 1 is used to monitor the received photocurrent. it must be connected to a positive voltage within the specified above. the received power is given by the photocurrent multiplied by the photodiode responsivity. rx pd t vpdr monitor pd 200ohm vcc control circuit pmon+ pmon- 3k 3k ld 10ohm vcc bias circuit bm+ bm- 3k 3k i bias i mon i pd analog monitoring function connections
optoway trsl-7130w / TRSL-7130AW ******************************************************************************************************************************************************************************* ******************************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 v2.0 connection diagram pin symbol notes pin symbol notes 1 vpdr receiver power monitor. this pin must be connected to a positive power supply (vcc), preferably via a s mall resistor. supplier photocurrent and maybe used to monitor receiver power. 11 vcct +3.3v dc transmitter power supply 2 veer receiver ground. 12 veet transmitter ground. 3 veer receiver ground. 13 t dis transmitter disable. connect this pin to logic 1 to disable module. to enable module connect to logic low 0 4 nc no connected 14 td + transmitter data in 5 nc no connected 15 td - transmitter data in bar 6 veer receiver ground. 16 veet transmitter ground. 7 vccr +3.3v dc receiver power supply 17 bmon - laser bias monitoring C negative end 8 sd signal detect. logic 1 indicate a normal operation. 18 bmon+ laser bias monitoring C positive end (bmon+ - bmon-) = 10 x laser bias current 9 rd - receiver dataout bar 19 pmon- laser power monitoring -- negative end 10 rd+ receiver dataout 20 pmon+ laser power monitoring -- positive end (pmon+ - pmon-) = 200 x monitor photdiode current ms ms mounting studs. connect to chassis ground recommended circuit schematic v p d r 1 v e e r x 2 v e e r x 3 n c 4 n c 5 v e e r x 6 v c c r x 7 s d 8 r d - 9 r d + 1 0 v c c t x 1 1 v e e t x 1 2 t d i s 1 3 t d + 1 4 t d - 1 5 v e e t x 1 6 b m o n - 1 7 b m o n + 1 8 p m o n - 1 9 p m o n + 2 0 tx rx microstrip6 z=5or microstrip5 z=50r l2 1uh c2 100nf c4 10uf c3 100nf vcc3.3v l1 1uh c8 10uf c1 100nf microstrip8 z=5or microstrip7 z=50r phy device td- td+ rd+ rd- sd r14 100r vcc3.3v lvpecl vcc3.3v lvpecl to lvttl stage tdis(lvttl) bmon- bmon+ pmon+ pmon- 10nf 200r 3k vccrx(3.3v) vpdr note: 1. tx input is terminated inside the module. 2. veer and veet are not internally connected to each other. 3. 50 line pattern and component placements on td+/td- and rd+/rd- lines shall be symmetrical for better impedance matching.
optoway trsl-7130w / TRSL-7130AW ******************************************************************************************************************************************************************************* ******************************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 v2.0 package diagram units in mm 1) standard case trsl-7130w / TRSL-7130AW 2) extended case trsl-7130we / TRSL-7130AWe note: specifications subject to change without notice.
|
